TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 419 of 968

TM 9-2815-210-34-2-2

(3) Nozzle spray pattern check.

FRAME 1

1.

2.

3.

Close pressure gate valve (1).

NOTE

Nozzles for engines LD-465-1, LD-465-1C, LDT-465-1C,

and LDS-465-1 will have dual spray patterns, as shown.

Nozzles for engines LDS-465-1A and LDS-465-2 will have

single spray patterns, as shown.

Pump handle (2) about 15 times per minute.

Check that spray patterns are

good.

If pattern is not good, do steps 1 and 2 several times. If pattern still is not

good, disassemble, clean and inspect, and repair nozzle. Refer to para 4-40b,

c, and d.

END OF TASK

4-400