TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

  TM-9-2815-210-34-2-2 - Page 418 of 968

TM 9-2815-210-34-2-2
(2) Nozzle leakage check.
FRAME 1
1.
Make sure pressure gage valve (1) is open.
2.
Pump handle (2).
As pressure comes close to 2800 psi, check that there are
no fuel drops on the nozzle (3) or that fuel does not come out as a stream. If
either happens, disassemble, clean and inspect, and repair nozzle. Refer to
para 4-40b, c, and d.
END OF TASK
4-399


Back to Top