TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 409 of 968

TM 9-2815-210-34-2-2

4-39. OIL COOLER AND OIL COOLER COVER.

a .

Cleaning.

FRAME 1

1.

2.

Clean oil

and gum

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel and

damage to equipment.

cooler cover (1) with dry cleaning solvent. Clean off scale, sludge,

with a stiff brush.

Dry with clean cloth.

WARNING

Eye shields must be worn when using compressed air.

Eye injury can occur if eye shields are not used.

Clean scale from outside of oil cooler (2) with a stiff brush. Soak oil cooler in

dry cleaning solvent until oil passages (3) are clean. Blow dry oil passages

with compressed air.

END OF TASK

4-390