TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 403 of 968

TM 9-2815-210-34-2-2

(2) Inspection and repair.

FRAME 1

1.

Check that six fuel injector tubes (1) are not cracked, split, dented, kinked or

damaged in any other way.

If fuel injector tube is damaged in any way, get a

new fuel injector tube assembly.

2.

Check that 12 coupling nuts (2) are not cracked, split, dented, stripped or

damaged in any other way.

Use a thread chaser to repair minor thread

damage.

If more repair is needed, get a new fuel injector tube assembly (1).

3.

Check that six dust boots (3) are not cracked, torn, dried out or damaged

in any other way.

If dust boot is damaged in any way, cut off dust boot and

get a new dust boot.

IF ANY DUST BOOTS (3) WERE CUT OFF, GO TO FRAME 2.

IF NO DUST BOOTS (3) WERE CUT OFF, GO TO FRAME 3

4-384