TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 402 of 968
TM 9-2815-210-34-2-2
FRAME 2
1.
2.
Clean six boots (1) and 12 tube clamps (2) with soapy water.
WARNING
Dry cleaning solvent is flammable. Do not use near an
open flame.
Keep a fire extinguisher nearby when sol-
vent is used.
Use only in well-ventilated places.
Failure to do this may result in injury to personnel and
damage to equipment.
Clean three brackets (3), two clamps (4), eight retainers (5), eight screws
(6), and nine nuts (7) with dry cleaning solvent. Use a stiff brush to take
off sludge and gum deposits. Dry with clean cloth.
END OF TASK
4-383
Back to Top
