TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 395 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

Put woodruff key (1) in shaft (2).

2.

Put drive gear (3) on shaft (2), alining gear keyway with woodruff key (1).

3.

Using hydraulic pump gear installer, put on drive gear (3).

4.

Put washer (4) and nut (5) on shaft (2).

Using torque wrench, tighten nut

to 45 to 50 pound-feet.

GO TO FRAME 3

TA 121143

4-376