TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 391 of 968

TM 9-2815-210-34-2-2

(3 )

Inspection

FRAME 1

and repair.

1.

2.

Check that all threaded parts are not stripped, crossthreaded or damaged in

any other way.

Take out minor thread damage with thread chaser or tap.

If more repair is needed, get a new part.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in w en-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

Check that hvdraulic pump (1) has no cracks, nicks, burrs or scratches on

gasket surface.

Tak e

-

out minor nicks, burrs or scratches with a fine mill

file or crocus cloth dipped in dry cleaning solvent. If more repair is needed,

get a new part.

GO TO FRAME 2

NOTE :

CHECK ONLY THOSE PARTS WHICH

ARE CALLED OUT IN THIS FRAME.

PARTS WITHOUT CALLOUTS ARE

SHOWN ONLY FOR REFERENCE

PURPOSES OR ARE CHECKED IN

ANOTHER FRAME.

TA 121139

4-372