TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 382 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

2.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in w en-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

Check that pump adapter (1) and manifold assembly (2) are not cracked,

bent, dented and have no nicks, burrs or scratches on gasket surfaces.

Take out minor nicks, burrs or scratches with a fine mill file or crocus

coth dipped in dry cleaning solvent.

If more repair is needed, get a new

part.

Check that drive gear (3) has no cracks, nicks, burrs, scratches or worn

or chipped gear teeth.

Take out minor nicks, burrs or scratches with a fine

mill file or crocus cloth dipped in dry cleaning solvent. If more repair

is needed, get a new part.

GO TO FRAME 3

NOTE :

CHECK ONLY THOSE PARTS WHICH

ARE CALLED OUT IN THIS FRAME.

PARTS WITHOUT CALLOUTS ARE

SHOWN ONLY FOR REFERENCE

PURPOSES OR ARE CHECKED IN

ANOTHER FRAME.

TA121130

4-363