TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 385 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

Put woodruff key (1) in shaft (2).

2.

Put drive gear (3) on shaft (2), alining keyway (4) with woodruff key (l).

3.

Using hydraulic pump gear installer, put on drive gear (3).

4.

Put on washer (5) and nut (6). Using torque wrench, tighten nut to 45 to

50 pound-feet.

GO TO FRAME 3

TA 121133

4-36 6