TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 390 of 968

TM 9-2815-210-34-2-2

(2)

Cleaning.

FRAME 1

1.

2.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

CAUTION

Do not put hydraulic pump (1) in dry cleaning solvent,

Parts can be damaged and pump will not run properly.

Clean hydraulic pump (1) with dry cleaning solvent. Use a stiff brush to

take off carbon and sludge. Dry with clean cloth.

Clean three elbows (2, 3, and 4) , adapter (5), drive gear (6), pump adapter

(7), two nuts (8), woodruff key (9), and nut (10) in dry cleaning solvent.

Use a stiff brush to take off carbon and sludge. Dry with clean cloth.

END OF TASK

NOTE

PARTS WITHOUT CALLOUTS ARE SHOWN ONLY FOR

REFERENCE PURPOSES.

TA 121138

4-371