TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 392 of 968

TM 9-2815-210-34-2-2

FRAME 2

WARNING

1.

2.

GO

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

Check that pump adapter (1) is not cracked or bent and has no nicks, burrs

or scratches on gasket surfaces.

Fix minor nicks, burrs or scratches with

a fine mill file or crocus cloth dipped in dry cleaning solvent. If more

repair is needed, get a new part.

Check that drive gear (2) has no cracks, nicks, burrs, scratches or worn or

chipped gear teeth.

Take out minor nicks, burrs or scratches with a fine

mill file or crocus cloth dipped in dry cleaning solvent. If more repair is

needed, get a new part.

TO FRAME 3

NOTE :

CHECK ONLY THOSE PARTS WHICH

ARE CALLED OUT IN THIS FRAME.

PARTS WITHOUT CAL LOUTS ARE

SHOWN ONLY FOR REFERENCE

PURPOSES OR ARE CHECKED IN

ANOTHER FRAME.

TA 121140

4-373