TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 376 of 968

TM 9-2815-210-34-2-2

4-35. FUEL INJECTION PUMP ATTACHING PARTS.

a. Cleaning. There are no special cleaning procedures needed. Refer to

cleaning procedures given in para 4-3.

b .

Inspection and Repair.

FRAME 1

1.

Check that two screws (1), two screws (2), three screws (3), two fuel

injection pump mounting screws (4), and nut (5) are not stripped, cross-

threaded or damaged in any other way.

If parts are damaged, get a new

part.

2.

Check that support bracket (6) and lockplate (7) are not bent or cracked.

Take out minor bends.

If more repair is needed, get a new part.

GO TO FRAME 2

4-357