TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 371 of 968

TM 9-2815-210-34-2-2

(2) Inspection and repair.

FRAME 1

1.

Check that all threads on tube nuts at end of tubes (1 and 2) are not stripped,

crossthreaded or damaged in any other way.

Fix minor thread damage with a

tap.

If more repair is needed, get a new part.

2.

Check that two tubes (1 and 2) are not cracked, brittle, split or damaged in

any other way.

If tube is damaged in any way, get a new part.

3.

Check that clamp (3) is not bent, dented or cracked. Take out minor bends

or dents.

If more repair is needed, get a new part.

4.

Put clamp (3) on hoses (1 and 2).

END OF TASK

4-352