TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 370 of 968
TM 9-2815-210-34-2-2
4-34.
FUEL FILTER HOSES AND RELATED PARTS.
a. Engine LDS-465-1.
(1) Cleaning .
FRAME 1
1.
2.
3.
Take clamp (1) off hoses (2 and 3).
Clean inside and outside of two tubes (2 and 3) with soapy water and dry
with clean cloth.
WARNING
Dry cleaning solvent is flammable. Do not use
near an open flame.
Keep a fire extinguisher nearby
when solvent is used.
Use only in well-ventilated
places.
Failure to do this may result in injury to
personnel and damage to equipment.
CAUTION
Do not let dry cleaning solvent touch two hoses
(2 and 3).
Hoses will dry out, rot, and need
replacement.
If dry cleaning solvent splashes on
hoses, dry them with clean cloth.
Clean clamp (1) and four tube nuts (4) with dry cleaning solvent. Use a
stiff brush
-
to take off sludge or gum deposits.
-
Dry with clean cloth.
END OF TASK
4-351
Back to Top
