TM 9-2815-210-34-2-2
FRAME 2
1.
Check that shaft coupling (1) is not bent, cracked or crossthreaded. Fix
minor thread damage with a tap.
If more repair is needed, get a new shaft
coupling.
2.
Check that retaining plate (2) is not bent, cracked or damaged in any other
way.
If repair is needed, get a new retaining plate.
3.
Check that gear (3) is not cracked, chipped, scratched or badly worn.
Take out minor scratches or burrs with a fine mill file. If more repair is
needed, get a new gear.
END OF TASK
4-358