TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 406 of 968

TM 9-2815-210-34-2-2

4-38. FUEL INJECTOR FUEL RETURN TUBES.

a.

Cleaning.

FRAME 1

1.

2.

Clean plastic fuel tubes (1) with soap and water.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

Eye shields must be worn when using compressed air.

Eye injury can occur if eye shields are not used.

Clean clamps (2), connecting tees (3), and elbows (4) with dry cleaning sol-

vent and blow dry with compressed air.

END OF TASK

4-387