TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 412 of 968

TM 9-2815-210-34-2-2

c .

Leakage Test.

FRAME 1

1.

Plug one hole (1).

2.

Put compressed air hose carrying 150 psi of air pressure in hole (2). Be sure

hose seals tightly around hole so no air can get out of oil cooler (3).

NOTE

If oil cooler (3) leaks, air bubbles will be seen in

water.

3.

Put oil cooler (3) under water and check that it does not leak. If oil cooler

leaks, get a new one.

END OF TASK

4-393