TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 414 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

2.

END

Open pressure gate valve (1).

NOTE

New nozzles should open between 3050 to 3150 psi. Used

nozzles should open at a minimum of 2800 psi. There

should not be more than a 300 psi difference between any

two nozzles in a complete set.

Pump handle (2) and note pressure on gage (3) when nozzle (4) opens and

spray comes out.

If nozzle does not open within ranges noted above, do

nozzle opening pressure adjustment. Refer to para 4-40a (1).

OF TASK

4-395