TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 411 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

2.

Check that oil cooler (1) has no cracks. If

one.

WARNING

Dry cleaning solvent is flammable.

oil cooler is damaged, get a new

Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

Check that gasket surface (2) of oil cooler (1) and oil cooler cover (3) have

no nicks, burrs or scratches. Take out minor nicks, burrs or scratches

with a fine mill file or crocus cloth dipped in dry cleaning solvent. If more

repair is needed, get a new part.

END OF TASK

4-392