TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 561 of 968

TM 9-2815-210-34-2-2

d .

Leak Test.

Smoking, sparks or open flames are not allowed

within 50 feet of work area during this task.

Fire or explosion could occur, causing injury

to personnel and damage to equipment.

NOTE

This is an alternate procedure used for ref-

erence purposes only.

Standard procedure is

to test for leaks during dynamometer test and

adjustment.

FRAME 1

1.

2.

3.

4.

Hook up hose (1) from supply tank (2) of diesel fuel to pump inlet (3).

Hook up hose (4) from pump outlet (5) to adjustable valve (6).

Hook up pressure gage (7) from adjustable valve (6).

Hook up hose (8) from pressure gage (7) to nozzle and check valve assembly

(9), inlet (10), and outlet (11).

GO TO FRAME 2

4-542