TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 555 of 968

TM 9-2815-210-34-2-2

4-62. FLAME HEATER NOZZLE AND VALVE ASSEMBLY (UNCOVERED SYSTEM).

a. Cleaning and Inspection.

FRAME 1

1.

2.

3.

4.

Plug nozzle and valve assembly fuel inlet (1) and outlet (2) with pipe plugs.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when sol-

vent is used.

Use only in well-ventilated places. Fail-

ure to do this may result in injury to personnel and

damage to equipment.

Clean nozzle and valve assembly (3) with dry cleaning solvent. Take off heavy

carbon deposits with a stiff brush.

Check that fuel inlet (1) and fuel outlet (2) threads are not crossthreaded.

Check that nozzle and valve assembly (3) is not cracked or damaged. Get a

new nozzle and valve assembly if it is cracked or damaged.

END OF TASK

4-536