TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 549 of 968

TM 9-2815-210-34-2-2

4-60. FLAME HEATER WIRING HARNESS AND ELECTRICAL LEAD ASSEMBLY

(UNCOVERED SYSTEM).

a

“

Cleaning.

Clean wiring harness and lead assembly with dry lint-free cloth.

b. Inspection and Repair.

NOTE

Repair is limited to getting anew wiring harness

and electrical lead assembly.

FRAME 1

1.

Check that wiring harness and electrical lead assembly (1) is not cracked

or frayed.

2.

Check that threads on receptacle connector (2) are not cracked, cross-

threaded or burred.

3.

Get new wiring harness and electrical lead assembly (1) if it is damaged.

4.

Check that wiring harness and electrical lead assembly (1) has continuity.

5.

Get new wiring harness and electrical lead assembly (1) if there is no

continuity.

END OF TASK

4-530