TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 541 of 968

TM 9-2815-210-34-2-2

FRAME 4

1.

Put clutch pressure plate (1) on flat surface.

2.

Using combination square (2), check for 1-9/32 inch clearance A between

pressure plate face (3) and pressure rover flange (4).

3.

Using 9/16-inch socket (5) with breaker bar (6), set three retaining screws

(7) and washers (8) to get 1-9/32 inch clearance A between pressure plate face

(3) and pressure cover flange (4).

GO TO FRAME 5

4-522