TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 544 of 968

TM 9-2815-210-34-2-2

4-57. FUEL INJECTION PUMP DRIVE GEAR ACCESS COVER (ENGINES LD-465-1,

LD-465-1C, AND LDT-465-1C).

There are no special cleaning procedures needed. Refer to

cleaning procedures given in para 4-3.

b. Inspection and Repair.

FRAME 1

1.

2.

3.

Check that

other way.

Check that

other way.

new access

five nuts (1) are not stripped, crossthreaded or damaged in any

If nuts are damaged, get new ones.

access cover (2) is not cracked, bent, dented or damaged in any

Take out minor bends or dents.

If more repair is needed, get a

cover .

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel and

damage to equipment.

Check that access cover (2) has no nicks, burrs or

surface.

Take out minor nicks, burrs or scratches

crocus cloth dipped in dry cleaning solvent.

END OF TASK

scratches on gasket

with a fine mill file or

4-525