TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 553 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

2.

3.

4.

5.

6.

Open adjustable valve (1) and start fuel pump.

Keep valve (1) open until system is purged of air.

Close valve (1).

Turn rheostat (2) until voltmeter (3) reads 24 volts.

Pressure gage (4) should read 90 to 100 psi.

To set pressure, if necessary, loosen check valve locknut (5)’ with wrench.

Turn relief valve adjusting screw (6) with screwdriver until pressure gage

reads 90 to 100 psi.

Hold relief valve adjusting screw with screwdriver and

tighten check valve locknut with wrench.

END OF TASK

4-534