TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 542 of 968

TM 9-2815-210-34-2-2

FRAME 5

1.

Using combination square (1), check clearance A from three release levers (2)

to pressure plate face (3).

Clearance should be 2-5/32 inches.

2.

If clearance is not as given in step 1, take off three locknuts (4).

3.

Using 1 1/16-inch socket (5) with breaker bar (6), turn three adjusting

screws (7) to get clearance A of 2-5/32 inches.

4.

Hold adjustment screws (7). Put on locknuts (4).

END OF TASK

4-523