TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 533 of 968

TM 9-2815-210-34-2-2

b .

Inspection.

NOTE

For engines LD 465-1, LD 465-1A, and LDT 465-1A,

go to frame 1.

For engines LDS 465-1 and

LDS 465-1A, go to frame 2. For engine LDS 465-2

go to frame 5.

FRAME 1

1.

2.

3.

4.

5.

6.

7.

Check that clutch disk drive hub (1) has no worn splines and looseness on

driven plate (2).

Check that there are no broken or missing damper springs (3).

Check that there are no loose pins (4) holding retainer plate (5) to driven

plate (2).

Check that clutch disk facing (6) is not burned, loose on driven plates (2) or

damaged in any other way.

Check that clutch disk (7) is not cracked or worn.

If clutch disk (7) is damaged, throw disk away and get a new one.

Measure thickness of disk facing (6) at several dates. If thickness is less

than 0.350 inch, throw disk away and get a new

-

one .

GO TO FRAME 3

4-514