TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 528 of 968

TM 9-2815-210-34-2-2

FRAME

3

1.

Set up arm assembly (1) with grooved pulley (2) in arbor press, as shown.

2.

Press grooved pulley (2) on arm assembly (1).

3.

Set up arm assembly (1) in arbor press and press in sleeve bushing (3).

4.

Put in pipe fitting (4), lubrication fitting (5), and lubricant relief fitting (6).

GO TO FRAME 4

4-509