TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

  TM-9-2815-210-34-2-2 - Page 521 of 968

TM 9-2815-210-34-2-2
FRAME 2
1.
2.
3.
4.
5.
Clean bearing (1). Refer to TM 9-214.
Clean seal (2) using soap and water. Dry
WARNING
with clean cloth.
Dry cleaning solvent is flammable. Do not use near an
open flame.
Keep a fire extinguisher nearby when
solvent is used.
Use only in well-ventilated places.
Failure to do this may result in injury to personnel
and damage to equipment.
Clean grooved pulley (3) with dry cleaning solvent. Dry with clean cloth.
Clean arm assembly sleeve bushing (4) with dry cleaning solvent. Dry with
clean cloth.
Clean arm assembly (5) with dry cleaning solvent. Use wire brush probe to
clean lubrication passage (6) in arm assembly. Dry with clean cloth-.
END OF TASK
4-502


Back to Top