TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 514 of 968

TM 9-2815-210-34-2-2

1.

2.

3.

4.

Check that two screws (1) and two nuts (2) do not have damaged threads or

other damage.

If screws or nuts are damaged, get new ones.

Check that two lockwashers (3) are not cracked or damaged in any way. If

lockwashers are damaged, get new ones.

Check that two 3/4-inch loop clamps (4) and two 1/2-inch loop clamps (5) are

not cracked, bent or damaged in any way.

Fix small bends in loop clamps. If

more repair is needed, get new loop clamps.

Put two 3/4-inch loop clamps (4) on hydraulic pump return tube (6) as shown.

Put two 1/2-inch loop clamps (5) on hydraulic pump bypass tube (7) as shown.

Join two loop clamps (4) to two loop clamps (5) using two screws (1), two nuts

(2), and two lockwashers (3) as shown.

GO TO FRAME 3

4-495