TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 515 of 968

TM

9-2815-210-34-2-2

FRAME

3

1.

Check that two hose clamps (1) and two hose clamps (2) are not cracked, bent

or damaged in any other way.

Fix small bends and dents with pliers. If more

repair is needed, get new hose clamps.

2.

Put two hose clamps (1) on hydraulic pump return tube (3) as shown.

3.

Put two hose clamps (2) on hydraulic pump bypass hose (4) as shown.

END OF TASK

4-496