TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 518 of 968

TM 9-2815-210-34-2-2

FRAME

3

1.

Set up grooved pulley (1) in vise, as shown.

2.

Using retaining ring pliers, take out retaining ring (2).

3.

Set up grooved pulley (1) in arbor press, as shown, and press out bearing

(3) .

GO TO FRAME 4

4-499