TM 9-2815-210-34-2-2
b .
Inspection and Repair.
FRAME 1
1.
2.
3.
4.
GO
Check that hydraulic pump bypass hose (1) and supply hose (2) are not dried
out, cracked or split.
If either hose is damaged, get new one.
Check that threads on fittings at ends of supply hose (2) are not damaged.
Fix small thread damage using thread chaser or tap. If more repair is needed,
get new supply hose.
Check that rubber ends of hydraulic pump return tube (3) are not dried out,
cracked or split.
If they are damaged, get a new hydraulic pump return tube.
Check that metal part of hydraulic pump return tube (3) is not cracked, split,
kinked, dented or damaged in any other way. Straighten small bends. If more
repair is needed, get a new hydraulic pump return tube.
TO FRAME 2
4-494