TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 520 of 968

TM 9-2815-210-34-2-2

b .

Cleaning.

FRAME 1

1.

2.

3.

GO

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame.

Keep a fire extinguisher nearby when sol-

vent is used.

Use only in well-ventilated places. Fail-

ure to do this may result in injury to personnel and

damage to equipment.

Clean three cap screws (1), four lockwashers (2), three flat washers (3), and

nut (4) with dry cleaning solvent. Dry with clean cloth.

Clean adjusting arm (5), sliding stay (6), pipe fitting (7) and lubrication

fitting (8) with dry cleaning solvent. Dry with clean cloth.

Clean two retaining rings (9), lubricant relief fitting (10), and plug (11) with

dry cleaning solvent. Dry with clean cloth.

TO FRAME 2

4-501