TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 530 of 968

TM 9-2815-210-34-2-2

4-56. CLUTCH AND TRANSMISSION DRIVE PLATES.

a .

Cleaning.

(1) Engines LD 465-1, LD 465-1C, and LDT 465-1C.

FRAME 1

1.

2.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when sol-

vent is used. Use only in well-ventilated places. Fail-

ure to do this may result in injury to personnel and

damage to equipment.

Eye shields must be worn when using compressed air.

Eye injury can occur if eye shields are not used.

Clean clutch pressure plate (1) assembly with dry cleaning solvent. Dry pas-

sages by blowing them out with dry, compressed air.

CAUTION

Never let dry cleaning solvent, grease or oil of any

kind touch clutch disk facings (2).

Clean clutch disk facings (2) with a wire brush. Clean drive hub (3) with a

clean rag soaked in dry cleaning solvent.

END OF TASK

4-511