TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 531 of 968

TM 9-2815-210-34-2-2

(2) Engines LDS-465-1 and LDS-465-1A.

FRAME 1

1.

2.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame.

Keep a fire extinguisher nearby when sol-

vent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

Eye shields must be worn when using compressed air.

Eye injury can occur if eye shields are not used.

Clean clutch pressure plate (1) with dry cleaning solvent. Dry passages by

blowing them out with dry, compressed air.

CAUTION

Never let dry cleaning solvent, grease or oil of any

kind touch clutch disk facings (2).

Clean clutch disk facings (2) with a wire brush. Clean drive hub (3) with a

cloth soaked in dry cleaning solvent and blow dry with dry, compressed air.

END OF TASK

4-512