TM 9-2815-210-34-2-2
(3) Engine LDS-465-2.
FRAME 1
1.
Clean all
brush .
WARNING
Dry cleaning solvent is flammable. Do not use near an
open flame.
Keep a fire extinguisher nearby when sol-
vent is used.
Use only in well-ventilated places. Fail-
ure to do this may result in injury to personnel and
damage to equipment.
Eye shields must be worn when using compressed air.
Eye injury can occur if eye shields are not used.
transmission drive plates (1) with dry cleaning solvent and a wire
2.
Clean scuff plate (2) and six screws (3) with dry cleaning solvent.
3.
Dry all parts with compressed air.
END OF TASK
4-513