TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 536 of 968

TM 9-2815-210-34-2-2

FRAME 4

1.

Using 0.010-inch feeler gage (1) and straight edge (2), check that pressure

plate (3) is not warped more than 0.010 inch.

2.

Check that grooves in pressure plate (3) are not deeper than 0.010 inch.

3.

Check that clutch pressure plate (3) has no overheating, rubbing against

other metal parts or broken springs.

4.

Check that there are no open cracks and heavy heat discoloration on pressure

plate (3).

5.

Check that there are no closely grouped hairline cracks which go to inner

or outer edge of pressure plate (3).

6.

If pressure plate (3) is damaged or worn, throw away pressure plate and get

a new one.

END OF TASK

4-517