TM 9-2815-210-34-2-2
FRAME 2
1.
2.
3.
4.
5.
6.
GO
Check that clutch disk drive hub (1) has no worn splines (2) or looseness on
driven plate (3).
Check that clutch disk has no loose rivets (4) holding driven plate (3) to
drive hub (1).
Check that disk facings (5) are not burned, loose on driven plate (3) or dam-
aged in any other way.
Check that disk (6) is not cracked or worn.
Check that thickness of disk facing (5) is not less than 0.411 inch.
If clutch disk (6) is damaged or worn, put in new clutch disk.
TO FRAME 3
4-515