TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 625 of 968

TM 9-2815-210-34-2-2

b.

Inspection and Repair.

(1) Engine LDS-465-2.

FRAME 1

1.

2.

3.

4.

Check that timing gear cover (1) is not cracked, dented or bent. If timing

gear cover is damaged, get a new one.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when sol-

vent is used.

Use only in well-ventilated places. Fail-

ure to do this may result in injury to personnel and

damage to equipment.

Check that gasket surfaces at bottom and at rear of cover (1) have no nicks,

scratches or

-

burrs .

Fix minor damage with a fine mill file or crocus cloth

dipped in dry cleaning solvent.

If more repair is needed, get a new cover.

Check that timing pointer pin (2) is not loose, cracked or damaged in any way.

If timing pointer pin is damaged, get a new timing gear cover.

Check that stud (3) does not have stripped threads and is not damaged in any

way. Fix minor thread damage with a thread chaser. If more repair is needed,

take out stud and put in a new one.

GO TO FRAME 2

4-606