TM 9-2815-220-24
OIL SAMPLING VALVE REPLACEMENT (2DR)
0071 00
THIS WORK PACKAGE COVERS:
Removal, Cleaning, Inspection, and Installation
INITIAL SETUP:
Tools:
General mechanic’s tool kit (item 121, WP 0176)
Torque wrench, 0-300 inch-pounds (item 124,
WP 0176)
Mandatory Replacement Parts:
Seal washer (item 158, WP 0175)
Expendable and Durable Items:
Lubricating oil (item 21, WP 0173)
Personnel Required:
Track Vehicle Repairer (1) 63H10
Equipment Conditions:
Engine removed from vehicle and placed on a
flat stationary surface
1
6
5
2,3,4
REMOVAL
NOTE
Step 1 opens an internal passage
allowing oil to drain from the
engine oil filter housing into the oil
pan.
1. Drain oil filter housing (1).
a. Remove oil vent cap screw (2) with flat
washer (3) and seal washer (4).
Discard
seal washer (4).
b. Loosen oil drain valve (5) six complete
turns to allow drainage into oil pan.
Do
not loosen oil drain valve adapter (6).
8
7
2.
Remove oil sampling valve (7) from
cover (8).
CLEANING
See WP 0028 for Standard Cleaning
Procedures.
WP 0071 00-1