TM 9-2815-220-24
FUEL INJECTION PUMP SHUTOFF LEAD REPLACEMENT (PN 10882641)
0069 00
THIS WORK PACKAGE COVERS:
Removal, Cleaning, Inspection, Repair, and Installation
INITIAL SETUP:
Tools:
General mechanic’s tool kit (item 121, WP 0176)
Mandatory Replacement Parts:
Lock washers (4) (item 84, WP 0175)
Self-locking nut (3) (item 42, WP 0175)
Personnel Required:
Track Vehicle Repairer (1) 63H10
Equipment Conditions:
Engine removed from vehicle and placed on a
flat stationary surface.
Engine front cooling fan and shroud removed WP 0054
REMOVAL
1. Remove fuel injection pump shut-off electrical lead (1).
a. Remove four machine screws (2), lock washers (3), and nuts (4) securing electrical lead (1)
to engine front sheet metal.
Discard lock washers.
b. Remove three machine screws (5), self-locking nuts (6) securing loop clamps (7, 8) to
crankcase case breather tube and electrical lead.
Discard self-locking nuts.
c. Disconnect electrical connector (9), at fuel injection pump (10).
10
7, 8 (three places)
2, 3, 4 (four places)
5, 6 (three places)
1
9
WP 0069 00-1