TM 9-2815-220-24
SMOKE GENERATOR WIRING HARNESSES (2DR) REPLACEMENT
(PN 12354467, 11672386)
0068 00
INSTALLATION (Continued)
2. Install single solenoid smoke generator wiring harness (9) (continued).
e. Install electrical connector at solenoid (10).
f.
Install ground wire (13) using screw (11) and new lock washer (12) (item 93, WP 0175).
g. Install harness (9) into loop clamps (17) using screws (15) and new lock washers (16)
(item 92, WP 0175).
h. Install new tie wraps (14) (item 80, WP 0175).
14
(Various
locations
along
harness)
15, 16, 17
10
9
11, 12
13
END OF WORK PACKAGE
WP 0068 00-7 (8 blank)