TM 9-2815-220-24
SMOKE GENERATOR WIRING HARNESSES (2DR) REPLACEMENT
(PN 12354467, 11672386)
0068 00
INSTALLATION (Continued)
2. Install single solenoid smoke generator wiring harness (9).
a. Position harness (9) in place on engine.
b. Install electrical plug connector at T connection (22) of starter solenoid ground harness.
c. Install wiring harness (9) into loop clamps (20).
d. Install three screws (18) and new lock washers (19) (item 92, WP 0175) into loop
clamps (20).
e. Install new tie wraps (21) (item 80, WP 0175).
18, 19, 20 (three places)
21 (Various places along harness)
22
9
WP 0068 00-6