TM 9-2815-220-24
FUEL INJECTION NOZZLE REPLACE/REPAIR
0114 00
4
3
REMOVAL (Continued)
2. Remove and discard steel gasket (4) from
nozzle assembly (3).
NOTE
In some cases, when the nozzle has
heavy carbon deposits, the nozzle
will have to be pulled with a
special puller.
If this is the case,
proceed with the following steps.
If not, proceed to "TEST".
3. Remove fuel inlet fitting (5) from body (6)
and remove body (6) from retainer (2).
4. Using socket wrench (7) remove retainer (2)
from engine.
7
5
6
2
2
WP 0114 00-2