TM 9-2815-220-24
FUEL INJECTION NOZZLE REPLACE/REPAIR
0114 00
REMOVAL (Continued)
5. Turn shaft (8) of mechanical puller (9) (item 44, WP 0176) counterclockwise to the end of its
thread.
6. Install mechanical puller (9) over nut (10) and rest on spacer (11).
7. Turn mechanical puller (9) clockwise to engage nut (10) threads.
Continue turning until
shaft (8) bottoms out.
8. Using crowfoot attachment (item 31, WP 0176), turn puller plain nut (12) clockwise to remove
nut (10) and associated parts.
NOTE
8
12
10
11
9
12
8
Cylinder
9
Cylinder
Valve
Cover
Valve
Cover
If the nozzle was removed with a special puller, nozzle will need to be
reassembled prior to testing.
Perform steps 5 through 9 of
"ASSEMBLY".
WP 0114 00-3