TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 110 of 736

TM 9-2815-225-34&P

0008 00

0008 00-20

BIG CAM III ENGINE REMOVAL (Contd)

65.

Remove transmission oil temperature sensor electrical connector nut (4), washer (3), and

transmission oil temperature sensor electrical connector (1) from transmission oil temperature

sensor (2).

66.

Disconnect engine speed sensor electrical connector (6) from engine speed sensor (5) on

transmission (7).

67.

Disconnect turbine speed sensor electrical connector (9) from turbine speed sensor jumper

harness (10) on transmission (7).

68.

Disconnect output speed sensor electrical connector (11) from output speed sensor (12) on

transmission (7).

69.

Remove transmission electrical harness nut (17), screw (14), clamp (13), two washers (15), and

transmission electrical harness (8) from transmission (7).

70.

Disconnect control valve module electrical harness (16) from transmission electrical harness (8).

Figure 31.

Transmission Oil Temperature

Sensor Removal.

Figure 32.

Engine Speed and Turbine Sensor Removal.

1

4

3

2

10

9

8

7

6

5