TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 112 of 736

TM 9-2815-225-34&P

0008 00

0008 00-22

BIG CAM III ENGINE REMOVAL (Contd)

71.

Loosen two alternator mounting bracket screws (3).

72.

Loosen two alternator jam nuts (1) on alternator adjusting rod (6).

73.

Push alternator (5) in towards engine (2) and remove two drive belts (4).

74.

Remove alternator terminal nut (19), washer (18), and engine electrical harness positive lead (15)

from alternator positive terminal (17).

75.

Remove alternator terminal nut (7), washer (8), and engine electrical harness negative lead (9)

from alternator negative terminal (16).

76.

Remove alternator terminal nut (10), washer (11), and engine electrical harness

transformer/rectifier positive lead (14) from alternator transformer/rectifier positive terminal (21).

77.

Remove alternator terminal nut (12), washer (13), and engine electrical harness

transformer/rectifier negative lead (22) from alternator transformer/rectifier negative

terminal (20).

Figure 35. Alternator Belt Removal.

2

1

6

1

5

4

3