TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 102 of 736

TM 9-2815-225-34&P

0008 00

0008 00-12

BIG CAM III ENGINE REMOVAL (Contd)

Figure 17. A/C Condenser Hoses Removal.

NOTE

Do not disconnect A/C lines or hoses from A/C condenser. A/C

condenser can be removed from radiator and positioned on

outside of passenger side frame rail for engine removal.

39.

Remove three A/C condenser line locknuts (6), washers (7), screws (1), and clamps (8) from

radiator support brackets (9). Discard locknuts (6).

40.

Remove four A/C condenser locknuts (2) and A/C condenser (4) with A/C compressor lines (5)

attached, from two support brackets (3) on front of radiator (10). Discard locknuts (2).

41.

Remove coolant temperature sender terminal nut (12) and coolant temperature sender electrical

connector (13) from coolant temperature sender terminal (14).

42.

Remove coolant temperature sender terminal screw (11) and coolant temperature sender electrical

connectors (15) from coolant temperature sender terminals (14) on radiator (10).

2

3

4

2

5

6

7

8

1