TM-9-2815-225-34-P
ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2005
TM-9-2815-225-34-P - Page 96 of 736
TM 9-2815-225-34&P
0008 00
0008 00-6
BIG CAM III ENGINE REMOVAL (Contd)
10.
Release three air cleaner element clamps (1) and remove air cleaner element (2) from air cleaner
housing (9). Discard air cleaner element (2).
11.
Loosen three clamps (4) and remove air cleaner duct assembly (5) from turbocharger outlet (8) and
air cleaner outlet elbow (3).
12.
Remove vent tube screw (11), locknut (18), and washer (12) from air duct support bracket (17).
Discard locknut (18).
13.
Remove two air vent hose clamps (13), air vent hose (14), and air vent tube (10) from air duct
support bracket (17).
14.
Remove four air cleaner housing bracket locknuts (22), washers (21), and screws (20) from support
brackets (17) and air cleaner housing (9). Discard locknuts (22).
15.
Remove indicator tube (16) and elbow (15) from air cleaner housing (9).
16.
Remove six air cleaner housing locknuts (31), washers (30), and air cleaner housing (9) from
adapter duct (25). Discard locknuts (31).
17.
Disconnect air duct door spring (32) from air duct door (29) and firewall (19).
18.
Remove ten adapter duct locknuts (27), washers (26) and (24), screws (23), four reinforcement
plates (28), and adapter duct (25) from air cleaner box (19). Discard locknuts (27).
Figure 7. Air Cleaner Removal.
1
2
1
9
3
4
4
5
8
4
~
Back to Top
